Module guide: Electrical diagrams (SchémaConcept)

Non-technical user guide: what the module is for, how to use it day to day and how it works with Dolibarr.

Diagram = quoteEvery symbol placed is a product of your catalogue, with its price
418 symbolsElectrical, electronics, low voltage, home automation, energy
Distribution boardRows, RCDs, checks, labels, single-line diagram
Native proposals and ordersProposal, customer order and supplier orders in one click

1. Module overview

SchémaConcept is an electrical and electronic diagram editor built into Dolibarr. You draw your installation or your board with standard symbols; every symbol placed matches a product of your Dolibarr catalogue. The diagram thus becomes a priced bill of materials, then a proposal, a customer order and supplier orders, with no re-keying. It is meant for electricians, low-voltage installers (network, alarm, video surveillance, sound), panel builders and electronics design offices.

  • A « SchémaConcept » menu: dashboard, list of diagrams, symbol library, catalogue, products and services, setup.
  • Two paths that can be enabled separately in the setup: « Electrician » (distribution boards, installation calculators) and « Electronics » (component calculators). The library offered follows the diagram's path.
  • A « Symbols » tab on Dolibarr product cards to link a product to one or more symbols.
  • Automatic electrical checks, a live priced bill of materials, PDF and SVG documents, frozen and comparable revisions.
  • Standard profiles per country: France (NF C 15-100) is supplied complete; Spain, the United Kingdom and a generic international profile are supplied in part; other countries can be completed.

2. The dashboard and the list of diagrams

The entry point to follow your studies.

  • Counters show drafts, validated diagrams, unpriced components, the amount priced this month, revisions this month and the number of available symbols.
  • Two charts show diagrams created and amounts priced month by month; the latest diagrams are listed.
  • The list can be filtered by reference, label, third party, status, domain (electrical or electronic) and diagrams with unpriced components, and sorted by column.
  • Each line opens the diagram card or its editor.

3. The diagram card

The diagram's identity and life cycle.

  • A diagram has an automatic reference, a label, a third party, a project, an optional finished product, a domain, a sheet format, a grid step and a standard profile.
  • Statuses: draft (editable), validated (frozen, opens sales), cancelled. Reopening a validated diagram creates a new revision.
  • Tabs give access to the editor, the bill of materials, the connections, the distribution boards, sales, documents, revisions and notes.
  • The standard profile is chosen automatically from the customer's country, otherwise your company's; you can set it on the diagram.

4. The diagram editor

A scaled worksheet in the sheet format, with grid and title block.

  • Place a symbol from the library (search, categories) or from the « Products » tab, which places the symbol linked to a product directly.
  • Tools: select, hand to move the view, wire, junction, label (local, global or hierarchical), no-connect, text, frame; rotate, mirror, duplicate, delete.
  • Navigation: wheel to zoom, hand tool, middle click or Space + drag to move, Shift + wheel to scroll sideways, F for the whole page, zoom buttons.
  • Undo and redo, automatic saving, keyboard shortcuts; references (R1, Q2…) are assigned and renumbered without duplicates.
  • Component properties: reference, value, product, forced selling price or cost, « do not fit », exclusion from the bill of materials, position and hiding of texts.
  • Several sheets per diagram, and sub-sheets: a sub-sheet appears in its parent sheet as a box whose pins are its ports; a double-click opens it.

5. The symbol library

418 symbols drawn for the module, in 26 categories.

  • Electronics: passives, semiconductors, integrated circuits, connectors.
  • Installation: protection devices, modular devices, sockets, lighting, appliances, automation and sensors, motors, terminals.
  • Low voltage and new technologies: network and IT (rack, server, NAS, Wi-Fi, fibre), intrusion alarm and remote monitoring, video surveillance, fire safety, door entry and access control, audio video and entertainment (sound systems, DMX, moving heads), home automation, energy (solar, storage, EV charging).
  • A symbol editor lets you create your own symbols (lines, circles, arcs, texts, pins) or duplicate a supplied one.
  • Each symbol can be linked to one or more products, with a default value shown on the diagram.

6. The catalogue

Linking the library to your Dolibarr products.

  • A page lists each symbol and its default product, with category, price and photo.
  • A button creates all missing generic products at once, filed in native product categories and illustrated with the symbol drawing.
  • Prices are edited directly in the list; an existing product is never changed without your action.

7. Connections and electrical check

The module computes the links and reports anomalies.

  • Connections (nets) are computed at each save, including between sheets through global labels and hierarchical ports.
  • The electrical check reports unconnected pins, conflicting sources, duplicate references, orphan labels, unmatched ports, components without a product, dangling wires and more.
  • Each finding is located in the editor with one click; an accepted finding can be excluded with a comment.
  • The severity of each rule is set in the setup; the list of connections can be exported.

8. Bill of materials and pricing

The diagram becomes a priced list of materials.

  • Prices follow Dolibarr's proposal rules (customer price, price levels, VAT), with purchase cost and margin for authorised users.
  • Components grouped by product with their references, board devices, cables per metre carried by the wires.
  • Services and free lines (installation, commissioning, discount) added to the pricing.
  • CSV export, and creation of a native Dolibarr bill of materials for the finished product when the BOM module is enabled.

9. Distribution boards

Designing the enclosure, its rows and its protection devices.

  • A board has a location, a type (main or sub-board), a supply, a number of rows and modules, an upstream rating and a minimum spare capacity.
  • An assistant generates the devices from a list of circuits: distributed RCDs, circuit breakers, surge protector, water heater contactor, main switch.
  • A visual row editor lets you move and set each device.
  • Checks P01 to P12 report the usual deviations (row overflow, spare capacity, circuits per RCD, type A, cross-section and rating, number of points and sockets…), according to the standard profile.
  • Printable identification labels, CSV export, import of the protection devices drawn in the diagram, and generation of the board's single-line diagram in a new sheet.

10. Calculators

Design aids, for guidance.

  • Dwelling board calculator: rooms, appliances, circuits, RCDs, rows and supply subscription; it creates the diagram and its board in one click.
  • Power balance, cable cross-section and voltage drop.
  • Electronics: LED resistor, voltage divider, Ohm's law, standard values.
  • Results follow the chosen standard profile and are shown for guidance.

11. Standard profiles per country

Electrical rules follow the site's country.

  • Supplied profiles: France NF C 15-100 (2015 and 2024), Spain, United Kingdom, generic international profile; Belgium, Switzerland, Germany and Italy to be completed.
  • A profile sets circuit types, number of points, RCDs, minimum per room and the main circuit breaker.
  • A value that is not set triggers no check: the rule is shown as « not checked ».
  • Supplied profiles are references to be validated; you can copy, edit and import them and declare their validation. The module never certifies compliance.

12. Sales: proposals and orders

From the validated diagram to commercial documents.

  • A checklist shows what is missing before generating: third party, validated diagram, priced components.
  • Generation of a proposal, a customer order and supplier orders (one per supplier), with or without services.
  • Each generation freezes a revision of the pricing; an accidental double generation is refused.
  • Generated documents are linked to the diagram and the diagram appears in their linked objects.

13. Documents and revisions

Documents ready to send.

  • Diagram PDF: one page per sheet in the sheet format, with title block, followed by the priced bill of materials or a workshop version without prices, and the list of boards.
  • SVG export of each sheet.
  • Option: the PDF is attached automatically to the generated proposal.
  • Frozen revisions that can be viewed and compared: lines added, removed, quantities changed, totals.

14. Setup

Tabs to adapt the module.

  • General: electrician and electronics paths, reference prefix, default domain, sheet format and grid, prices shown in the editor.
  • Pricing (references in proposal line labels), electrical check (severity of diagram and board rules, sales blocked on error), standards (profiles, default profile per country, import), documents (default PDF variant, PDF attached to the proposal).
  • Sales: validated diagram required before any generation (configurable).
  • Library: adding and updating supplied symbols and categories, prefix of catalogue products.
  • KSIDol companion modules and the Bridge Concept3D / SchémaConcept: status of each one and a link to its setup or to the module list.

15. Links with Dolibarr

The module does not work in isolation: it integrates with the native building blocks of Dolibarr.

  • Third parties : a diagram is linked to a customer; their country sets the proposed standard profile. A third party that carries diagrams cannot be deleted; when two third parties are merged, the diagrams follow the one kept.
  • Projects : a diagram can be linked to a project, carried over to the generated proposal. A project that carries diagrams cannot be deleted from its card.
  • Products and services : each symbol placed is a catalogue product, with its prices; services complete the pricing. A « Symbols » tab is added to the product card.
  • Categories : the starter catalogue files generic products in native product categories.
  • Proposals, customer and supplier orders : generated from the bill of materials and linked to the diagram both ways. Deleting a proposal, order or BOM generated from a diagram removes the link and sets the diagram back to draft.
  • Bills of materials (BOM) : a native bill of materials can be created for the finished product.
  • Permissions : read, create and edit, validate, delete, see costs and margins, manage symbols. External (customer) accounts have no access to any page or document of the module; costs and margins are never shown without the matching permission.
  • Multi-company : diagrams, boards and symbols stay within their entity.
Need help? WhatsApp Phone: 07 45 15 75 87 Phone: 07 43 52 58 29 Email Open the form